| 引用本文: | 李颖,韩小旭,贾菲菲,赵霞.《中国药典》(2025年版)注射剂包装用橡胶密封件穿刺落屑用胶塞对照物质研制与应用[J].中国现代应用药学,2026,43(19):7-12. |
| Li Ying,Han Xiaoxu,Jia Feifei,Zhao Xia.Development and Application of the Reference Standards of Rubber Stopper for Test for Fragmentation of Injection Closures for Rubber Seals Used in Injection Packaging in the Chinese Pharmacopoeia (2025 Edition)[J].Chin J Mod Appl Pharm(中国现代应用药学),2026,43(19):7-12. |
|
| 摘要: |
| 目的 对《中国药典》(2025年版)四部通则4016 注射剂包装用橡胶密封件穿刺落屑测定法中所用的穿刺落屑用胶塞对照物质进行现状介绍,以便进一步规范该系列对照物质在药典方法中的使用。方法 分别对穿刺落屑用胶塞对照物质的研制及应用进行了简要介绍,并对展望了未来发展情况。结果 用于《中国药典》(2025年版)的穿刺落屑用胶塞对照物质,共有六类,研制过程包括:材料筛选与定性、均匀性检验、稳定性研究、协作标定与定值。由不同机构进行穿刺落屑测定,结果显示,一定程度上,所涉及的对照物质可起到对胶塞穿刺落屑测定过程的“统一度量衡”的作用。结论 在《中国药典》(2025年版)中明文标注的注射剂包装用橡胶密封件穿刺落屑用胶塞对照物质,使相关检测方法更加标准化和规范化;未来可考虑增加相关系列新对照物质。 |
| 关键词: 注射剂包装用橡胶密封件穿刺落屑 穿刺落屑用胶塞对照物质 对照物质 中国药典(2025年版) |
| DOI: |
| 分类号:R917.101 |
| 基金项目: |
|
| Development and Application of the Reference Standards of Rubber Stopper for Test for Fragmentation of Injection Closures for Rubber Seals Used in Injection Packaging in the Chinese Pharmacopoeia (2025 Edition) |
|
Li Ying, Han Xiaoxu, Jia Feifei, Zhao Xia
|
|
National Institutes for Food and Drug Control
|
| Abstract: |
| OBJECTIVE In order to further standardize the use of this series of control substances in the pharmacopoeial methods, introduce the current status of the reference standards of rubber stopper for test for fragmentation of injection closures used in the method for determining puncture debris of rubber seals for injection packaging as described in General Rule 4016 of Volume IV of the Chinese Pharmacopoeia (2025 edition). METHODS A brief introduction was given to the development and application of the reference standards of rubber stopper for test for fragmentation of injection closures, and future development prospects were also discussed. RESULTS The positive control rubber stoppers used in the Chinese Pharmacopoeia (2025 edition) are categorized into six types. The development process includes material screening and characterization, homogeneity testing, stability research, collaborative calibration, and value determination. The supporting tests, conducted by different institutions, on puncture force and puncture debris measurement showed that, to a certain extent, the reference substances involved played a role in "unifying the measurement standards" for the puncture debris measurement process of rubber stoppers. CONCLUSION The reference standards of rubber stopper for test for fragmentation of injection closures for injection packaging, explicitly labeled in the "Chinese Pharmacopoeia" (2025 edition), have standardized and normalized the relevant testing methods; in the future, consideration could be given to adding related new control substances. |
| Key words: rubber sealing components for injection packaging puncture and generate debris the reference standards of rubber stopper for test for fragmentation of injection closures control substance Chinese Pharmacopoeia (2025 Edition) |