• 首页期刊简介编委会刊物订阅专栏专刊电子刊学术动态联系我们English
引用本文:陈超,王丹丹,程磊.预灌封注射器橡胶活塞表面硅油提取及向甲氨蝶呤注射液中迁移的研究[J].中国现代应用药学,2022,39(9):1187-1191.
CHEN Chao,WANG Dandan,CHENG Lei.Study on Extraction of Silicone Oil from Rubber Plunger Surface of Prefilled Syringe and Its Migration into Methotrexate Injection[J].Chin J Mod Appl Pharm(中国现代应用药学),2022,39(9):1187-1191.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 967次   下载 778 本文二维码信息
码上扫一扫!
分享到: 微信 更多
预灌封注射器橡胶活塞表面硅油提取及向甲氨蝶呤注射液中迁移的研究
陈超, 王丹丹, 程磊
浙江省食品药品检验研究院, 浙江省药品接触材料质量控制研究重点实验室, 国家药品监督管理局仿制药评价关键技术重点实验室, 杭州 310051
摘要:
目的 研究预灌封注射器的橡胶活塞表面硅油的使用量,以及硅油在甲氨蝶呤注射液中的迁移量。方法 采用傅里叶变换红外光谱法测定预灌封注射器中溴化丁基橡胶活塞表面的硅油含量,并采用电感耦合等离子体质谱法测定甲氨蝶呤注射液中的硅油迁移量。结果 活塞表面的硅油含量为每个0.191 mg,0.5,0.2,0.15 mL规格甲氨蝶呤注射液的最大迁移量分别为2.65,1.26,1.04 μg。结论 傅里叶变换红外光谱法和电感耦合等离子体质谱法能分别快速测定橡胶活塞表面的硅油量和硅油在制剂中的迁移量。
关键词:  预灌封注射器  橡胶活塞  硅油  傅里叶变换红外光谱法  电感耦合等离子体质谱法  甲氨蝶呤注射液
DOI:10.13748/j.cnki.issn1007-7693.2022.09.009
分类号:R927.11
基金项目:浙江省药品监管系统科技计划项目(2022017)
Study on Extraction of Silicone Oil from Rubber Plunger Surface of Prefilled Syringe and Its Migration into Methotrexate Injection
CHEN Chao, WANG Dandan, CHENG Lei
Zhejiang Institute for Food and Drug Control, Key Laboratory of Drug Contacting Materials Quality Control of Zhejiang Provincial, National Medical Products Administration Key Laboratory for Core Technology of Generic Drug Evaluation, Hangzhou 310051, China
Abstract:
OBJECTIVE To study the amount of silicone oil used on the surface of rubber plunger of prefilled syringe and the migration of silicone oil into methotrexate injection. METHODS The content of silicone oil on the surface of brominated butyl rubber plunger in pre potted syringe was determined by Fourier transform infrared spectroscopy, the migration amount of silicone oil in methotrexate injection was determined by inductively coupled plasma mass spectrometry. RESULTS The content of silicone oil on the surface of plunger was each 0.191 mg, the maximum migration amounts of 0.5, 0.2, 0.15 mL methotrexate injection were 2.65, 1.26, 1.04 μg, respectively. CONCLUSION Fourier transform infrared spectroscopy and inductively coupled plasma mass spectrometry can be used to determine the amount of silicone oil on the surface of rubber plunger and the migration of silicone oil into the preparation.
Key words:  prefilled syringe  rubber plunger  silicone oil  Fourier transform infrared spectroscopy  inductively coupled plasma mass spectrometry  methotrexate injection
扫一扫关注本刊微信